LoRad Shielded Mains Blocks in Aluminium
The mains blocks are fully shielded from radiated electric fields by means of their aluminium chassis. The conductive chassis drains the interference down to ground. It has to be connected to an earthed socket with an earthed mains cable, in order to work properly. For a useful degree of shielding and immunity, the mains block should be combined and employed with SUPRA LoRad shielded mains cables.
SUPRA NIF Transient Filter
All models are equipped with SUPRA NIF (Non-Intrusive Filtering), a mild transient filter which will not influence the transient properties of the equipment. SUPRA NIF is developed by Ben Duncan Research in England.
Technical data MD06:
Standard European Standards, except UK, Ireland, Belgium and Italy
Maximal current 10 Ampere
Switch current capacity Optional 16A (high in-rush current capacity) Ampere
Nominal (maximal) voltage 230 (250) Volt
Maximal power load 2.3 kW
Mains frequency 50 Hz
Mains inlet socket International standard IEC-320 for 10 ampere
Internal cable area 2.5 mm2
Outlet sockets 2-6 (1 unfiltered, 5 NIF-filtered) pieces
Fuse 10 Ampere
Filter (level) Non-Intrusive Filtering (up to 40) dB
Tillbehör Brackets for wall mount and rubber feet as floor stands
Technical data MD06/SP:
Standard European Standards, except UK, Ireland, Belgium and Italy
Maximal current 10 Ampere
Switch current capacity Optional 16A (high in-rush current capacity) Ampere
Nominal (maximal) voltage 230 (250) Volt
Maximal power load 2.3 kW
Mains frequency 50 Hz
Mains inlet socket International standard IEC-320 for 10 ampere
Internal cable area 2.5 mm2
Outlet sockets 2 to 6 (1 unfiltered, the rest NIF filtered, all of them SP protected) pieces
Fuse 10 Ampere
Filter (level) Non-Intrusive Filtering (up to 40) dB
Surge protection (SP) L to 0, L to Ground and 0 to Ground
Included accessories Brackets for wall mount and rubber feet as floor stands